ALTIC HC COATING is an industrial protective coating designed for suitable metal, steel and industrial surfaces where durable surface protection is required. It can be incorporated into appropriate industrial coating systems depending on the substrate, service environment and required performance.
The coating is intended for professional industrial applications where surface preparation, correct application procedure and compatibility with the complete coating system are important for achieving reliable long-term performance.
ALTIC HC Coating can be considered for industrial equipment, fabricated structures, machinery, pipelines and other suitable surfaces requiring protective coating treatment.
Key Features & Benefits
- Industrial-grade protective coating
- Suitable for compatible metal and steel surfaces
- Supports long-term surface protection
- Suitable for industrial maintenance and fabrication applications
- Can be incorporated into compatible multi-coat coating systems
- Helps provide a uniform protective coating layer
- Suitable for a range of industrial structures and equipment
- Designed for professional coating application
Recommended Applications
ALTIC HC Coating can be used for suitable industrial applications such as:
- Industrial steel structures
- Fabricated metal components
- Machinery and equipment
- Process equipment
- Industrial pipelines
- Tanks and vessels
- Plant and factory structures
- Maintenance coating projects
- General industrial metal protection
The exact suitability of the product should be evaluated according to the substrate, operating conditions and required coating performance.
Suitable Substrates
Depending on the approved coating system and surface preparation, ALTIC HC Coating may be suitable for:
- Mild steel
- Carbon steel
- Fabricated steel
- Industrial metal surfaces
- Previously coated surfaces where compatibility has been confirmed
Proper surface preparation is essential before application.
Surface Preparation
The surface should be clean, dry and free from contaminants that could affect coating adhesion.
Remove:
- Oil and grease
- Dust and dirt
- Loose rust
- Mill scale
- Loose or peeling coatings
- Moisture
- Other surface contaminants
For steel surfaces, mechanical preparation or abrasive blasting may be selected according to the existing surface condition and the requirements of the complete coating system.
Where an existing coating is present, compatibility should be confirmed before application.
Application
ALTIC HC Coating should be mixed and applied according to the latest manufacturer-recommended application procedure.
Typical application steps include:
- Prepare the substrate thoroughly.
- Ensure the surface is clean and dry.
- Mix the coating uniformly before application.
- Apply the recommended primer or basecoat where required.
- Apply ALTIC HC Coating using the approved application method.
- Maintain the recommended coating thickness.
- Allow the coating to dry or cure as specified.
- Apply subsequent coats only after the recommended recoat interval.
Application equipment may include brush, roller or spray equipment, depending on the product specification and project requirements.
Coating System
ALTIC HC Coating may be used as part of a complete industrial coating system consisting of:
Surface Preparation → Primer → ALTIC HC Coating → Compatible Topcoat
The exact coating system should be selected based on:
- Substrate type
- Corrosion exposure
- Chemical environment
- Temperature
- Outdoor or indoor service
- Required service life
- Required finish
- Project specifications
Technical Specifications
Specific technical values such as viscosity, density, solids content, recommended DFT, coverage, drying time, recoat interval, thinner requirement and chemical/temperature resistance should be taken from the latest ALTIC HC Coating TDS.
This ensures that the product is specified and applied according to the current manufacturer’s requirements.
Safety & Handling
- Use appropriate personal protective equipment during application.
- Ensure adequate ventilation in enclosed areas.
- Avoid prolonged skin and eye contact.
- Keep containers properly closed when not in use.
- Follow the applicable Safety Data Sheet (SDS).
- Keep the product away from unsuitable heat or ignition sources where applicable.
- Do not mix with other coating products or thinners unless compatibility is confirmed.
Storage
Store ALTIC HC Coating in its original, tightly sealed container in a cool, dry and well-ventilated area.
Protect the product from excessive heat, direct sunlight, moisture and unsuitable storage conditions. Always follow the latest manufacturer storage and shelf-life recommendations.
Why Choose ALTIC HC Coating?
ALTIC HC Coating is intended for industrial coating applications where dependable surface protection and compatibility with a properly designed coating system are important.
Combined with appropriate surface preparation, primer selection and application control, it can form part of an industrial protection system for suitable steel, metal, equipment and structural surfaces.
For project-specific requirements, the final coating specification should be selected according to the operating environment and the latest technical documentation supplied by UGAM TECHNOLOGY.
Reviews
There are no reviews yet.