ALTIC EPSI THINNER is a specialized thinner designed for use with compatible ALTIC epoxy coating and paint systems. It helps achieve suitable application consistency when thinning is permitted by the relevant product Technical Data Sheet (TDS), while also supporting smooth application and equipment cleaning.
ALTIC EPSI THINNER can be used in industrial coating applications where the compatible epoxy coating system requires controlled viscosity adjustment or cleaning of application equipment. Proper thinner selection is important for maintaining coating performance, adhesion, finish, drying characteristics and overall protective properties.
Always refer to the latest ALTIC product TDS before adding thinner to any coating system.
Key Features & Benefits
- Designed for compatible ALTIC epoxy coating systems
- Helps adjust application viscosity where specified
- Supports smooth and consistent coating application
- Suitable for industrial coating application requirements
- Can assist with cleaning compatible application equipment
- Helps maintain proper application characteristics when used at the recommended quantity
- Suitable for use in industrial maintenance and protective coating systems
- Convenient solvent solution for compatible epoxy coating applications
Applications
ALTIC EPSI THINNER may be used with compatible ALTIC epoxy products for applications such as:
- Industrial steel structures
- Machinery and equipment
- Pipelines and process equipment
- Tanks and fabricated metal components
- Industrial floors and maintenance areas
- Protective epoxy coating systems
- General industrial painting and maintenance
- Cleaning of compatible coating application equipment
The exact application and permitted thinner quantity should always be confirmed from the TDS of the coating being applied.
Application & Usage
Before use, thoroughly read the technical documentation of the compatible ALTIC coating.
Where thinning is permitted:
- Mix the coating components according to the manufacturer’s instructions.
- Allow the coating system to achieve proper homogenization.
- Add ALTIC EPSI THINNER gradually in the specified quantity.
- Mix thoroughly until the required application consistency is achieved.
- Apply using the recommended brush, roller, conventional spray or airless spray method, as applicable.
- Do not exceed the recommended thinner addition.
- Clean application equipment using the appropriate cleaning procedure recommended for the coating system.
Important: Do not add thinner to an epoxy coating unless the relevant product TDS specifically permits it. Excessive thinning may affect film build, coverage, drying, adhesion and protective performance.
Important Considerations
Thinner compatibility can vary between epoxy products. The correct quantity depends on the coating formulation, application method, ambient conditions and required film thickness.
For best results:
- Use only with compatible ALTIC products.
- Follow the latest product-specific TDS.
- Maintain the recommended mixing ratio for two-component coatings.
- Avoid excessive thinning.
- Ensure adequate ventilation during application.
- Keep away from heat, sparks and open flames.
- Use appropriate PPE during handling and application.
Storage & Handling
Store ALTIC EPSI THINNER in its original, tightly closed container in a cool, dry and well-ventilated area. Keep away from direct sunlight, excessive heat, ignition sources and incompatible materials.
Handle according to the applicable Safety Data Sheet (SDS) and local safety requirements.
Safety
ALTIC EPSI THINNER is a solvent product and should be handled carefully. Avoid prolonged skin contact and inhalation of vapours. Use suitable gloves, protective clothing and eye protection during handling and application.
Ensure adequate ventilation in enclosed areas and keep the product away from sources of ignition.
Refer to the latest SDS for detailed information regarding hazards, first aid, fire-fighting measures, storage and disposal.
Why Choose ALTIC EPSI THINNER?
ALTIC EPSI THINNER provides a compatible solvent solution for applicable ALTIC epoxy coating systems, supporting controlled application consistency and coating-system maintenance when used according to the manufacturer’s recommendations.
For reliable coating performance, always select the thinner specified for the particular ALTIC product and follow the recommended application procedure.
Reviews
There are no reviews yet.