ALTIC 060 Epoxy Fire Retardant Intumescent Paint for Steel Protection

Introduction

In modern construction and industrial environments, fire safety is a top priority. Steel, while being one of the strongest and most widely used construction materials, loses its strength rapidly when exposed to high temperatures. At around 550°C, steel can lose up to 50% of its load-bearing capacity, leading to structural failures during fire incidents. To address this challenge, UGAM Technology has developed ALTIC 060 Epoxy Fire Retardant Intumescent Paint, a proven solution for ensuring the fire safety of steel structures without compromising aesthetics or durability.

Key Features and Benefits

• Certified Fire Protection
  • Tested and approved by leading laboratories such as NTH (2-hour rating), CPRI (4-hour rating), IIT Mumbai, and EXOVA USA.
  • Meets international fire safety standards including ASTM E-84, ASTM E-162, ASTM E-662, ASTM D-1360, and NFPA 703.
• High Thermal Insulation
  • Expands into a thick foam barrier under fire conditions.
  • Provides protection for up to 4 hours, ensuring enough time for evacuation and firefighting.
• Durability and Resistance
  • Strong adhesion to steel surfaces.
  • Resistant to water, oil, mild chemicals, and radiation.
  • Withstands harsh environmental conditions both indoors and outdoors.
• Eco-Friendly Formulation
  • Water-based, halogen-free, and asbestos-free.
  • Emits negligible toxic gases or smoke, ensuring safety for enclosed spaces.
• Easy Application
  • Can be applied with brush, roller, or airless spray.
  • No primer required on cable coatings; for metal surfaces, recommended use of ALTIC Zinc Rich Primer.
  • Compatible with epoxy top coats for enhanced weather protection.
• Versatile Applications
  • Industrial plants (refineries, chemical plants, power stations).
  • High-rise buildings and commercial complexes.
  • Defense installations, oil & gas facilities, and offshore structures.
  • Hospitals, hotels, IT parks, and data centers.

---

Technical Specifications

• Type: Epoxy-based intumescent fire retardant coating
• Color: Off-white (custom shades available)
• Finish: Matt
• Curing: Surface dry in 60 min; tack-free in 8 hrs; hard dry in 48 hrs
• Non-volatile matter: Min. 70%
• VOC Content: < 100 gm/kg
• Film Thickness Required for Fire Ratings:
  • 30 min: 500 microns (24–25 sq.ft/kg)
  • 1 hour: 1000 microns (10–12 sq.ft/kg)
  • 2 hours: 2000 microns (5–6 sq.ft/kg)
  • 3 hours: 3000 microns (4 sq.ft/kg)
  • 4 hours: 4000 microns (2.5–3 sq.ft/kg)

---

Advantages of ALTIC 060 Over Conventional Coatings

• Thin Film Application: Provides high fire resistance at low thickness, maintaining aesthetics.
• Non-toxic Performance: Unlike halogen-based coatings, it does not emit harmful gases.
• Prolonged Cable and Steel Life: Prevents premature ageing of cables and overheating of steel.
• Enhanced Safety: Minimizes flame spread, reduces smoke, and prevents dripping of burning fragments.
• Long-lasting Protection: When top-coated with epoxy varnish, it offers lifelong performance.

---

Application Procedure

• Surface Preparation
  • Ensure steel surfaces are clean, dry, and free from oil, grease, and rust.
  • Use ALTIC Zinc Rich Primer for metallic surfaces before applying ALTIC 060.
• Mixing and Application
  • Stir the product thoroughly before application.
  • Apply minimum two coats using brush, roller, or airless spray to achieve the required dry film thickness.
• Finishing
  • For decorative and weather-resistant finish, apply UGAM Epoxy Top Coat.
  • Suitable for indoor and outdoor use.

---

Approvals and Certifications

ALTIC 060 has been rigorously tested and approved by multiple national and international agencies:

• NTH (National Test House), Mumbai – Circuit integrity up to 2 hours.
• CPRI (Central Power Research Institute) – Certified for 4 hours.
• IIT Mumbai – Verified for structural fire performance.
• Spectro Analytical Labs – Fire retardant testing.
• ASTM & NFPA Standards – Passed multiple tests for flame spread, smoke generation, and surface burning.
• CII Green Products Council – Certified as eco-friendly.
• EXOVA USA – International approval for fire performance.

---

Conclusion

ALTIC 060 Epoxy Fire Retardant Intumescent Paint for Steel is not just a coating—it is a life-saving investment. With its advanced intumescent technology, certified performance, eco-friendly formulation, and wide industry approvals, it ensures safety, compliance, and long-term protection of critical infrastructure.

Whether it’s an industrial plant, commercial building, or defense installation, ALTIC 060 provides unmatched fire resistance, giving confidence to engineers, architects, and safety managers. By choosing ALTIC 060, you secure not only your infrastructure but also lives and investments.