ALTIC HR EPOXY PUTTY is a high-performance epoxy-based repair and filling material designed for industrial maintenance, surface repair and preparation of suitable metal and industrial substrates.
The putty can be used to fill surface imperfections, dents, voids, cracks and localized irregularities before the application of compatible protective coating systems. Its paste-like consistency allows it to be applied to areas where a conventional liquid coating may not be suitable for filling or profile correction.
ALTIC HR Epoxy Putty is suitable for maintenance and repair applications where a strong, properly prepared surface is required before subsequent coating operations.
Key Features & Benefits
- Epoxy-based industrial repair and filling putty
- Suitable for localized surface repair
- Helps fill dents, holes, voids and surface irregularities
- Supports surface profile correction before coating
- Suitable for industrial maintenance applications
- Provides a solid foundation for compatible protective coatings
- Useful for repairing prepared metal and industrial surfaces
- Suitable for fabrication, maintenance and refurbishment work
Recommended Applications
ALTIC HR Epoxy Putty can be considered for suitable industrial repair applications including:
- Steel structures
- Industrial machinery
- Equipment and components
- Pipelines and pipe fittings
- Tanks and vessels
- Fabricated metal surfaces
- Industrial maintenance projects
- Localized surface repairs
- Filling of dents and surface imperfections
- Preparation before protective coating application
The actual suitability should be confirmed based on the substrate and service conditions.
Typical Uses
ALTIC HR Epoxy Putty can help with:
Surface Filling
Used to fill localized holes, dents, voids and other surface imperfections that need to be corrected before coating.
Profile Correction
The putty can help create a more uniform surface profile on suitable substrates before application of subsequent protective coatings.
Industrial Repairs
Suitable for localized maintenance and repair work on industrial components and fabricated surfaces.
Coating Preparation
After appropriate curing and surface finishing, the repaired area can be prepared for application of a compatible primer or protective coating system.
Surface Preparation
Proper surface preparation is essential for good adhesion and long-term performance.
The substrate should be:
- Clean
- Dry
- Free from oil and grease
- Free from dust and loose particles
- Free from loose rust and scale
- Structurally sound
- Free from incompatible loose coatings
Where required, mechanical cleaning or abrasive blasting should be carried out to obtain a suitable surface.
Application Procedure
A typical application procedure is:
- Clean and prepare the damaged or irregular area.
- Ensure the surface is dry and free from contaminants.
- Prepare the epoxy putty components according to the manufacturer’s recommended mixing procedure.
- Mix thoroughly until a uniform material is obtained.
- Apply the putty to the required area using a suitable application tool.
- Press the material firmly into voids, dents or surface imperfections.
- Smooth the surface to the required profile.
- Allow the putty to cure according to the recommended curing conditions.
- Sand or mechanically finish the repaired area where required.
- Apply the compatible primer or coating system after the repaired surface has been properly prepared.
Important Application Note
ALTIC HR Epoxy Putty should be used according to the latest technical data sheet supplied for the product.
Mixing ratio, working time, curing time, recommended application thickness, temperature resistance, coverage and sanding/recoating intervals should be confirmed from the current product TDS before application.
The product should not be used outside its specified service conditions without technical evaluation.
Compatibility With Coating Systems
ALTIC HR Epoxy Putty can be incorporated into compatible industrial coating systems where localized filling or repair is required.
A typical system may include:
Surface Preparation → ALTIC HR Epoxy Putty → Compatible Primer → Protective Coating → Topcoat
The exact system should be selected according to the substrate, operating temperature, chemical exposure, corrosion environment and final service requirements.
Advantages in Industrial Maintenance
Using an appropriate epoxy repair putty can reduce the need for extensive replacement of components where damage is localized and the substrate remains suitable for repair.
ALTIC HR Epoxy Putty can assist applicators in:
- Correcting localized surface defects
- Improving surface uniformity
- Preparing repaired areas for coating
- Supporting maintenance and refurbishment work
- Extending the usefulness of suitable industrial components
Safety & Handling
- Use appropriate PPE during mixing and application.
- Avoid direct contact with skin and eyes.
- Ensure adequate ventilation during application.
- Do not use contaminated or improperly mixed material.
- Follow the manufacturer’s SDS and TDS.
- Keep containers closed when not in use.
- Do not mix components in quantities greater than can be applied within the specified working time.
Storage
Store ALTIC HR Epoxy Putty in its original, tightly closed packaging under the storage conditions specified by the manufacturer.
Protect the product from excessive heat, moisture, direct sunlight and unsuitable temperatures.
Always check the latest product label and TDS for the recommended shelf life and storage conditions.
Why Choose ALTIC HR Epoxy Putty?
ALTIC HR Epoxy Putty provides a practical solution for localized industrial surface repair, filling and profile correction. It can be used to prepare suitable metal and industrial substrates for subsequent protective coating applications.
When combined with proper surface preparation and a compatible coating system, it supports professional industrial maintenance and refurbishment work.
Reviews
There are no reviews yet.