ALTIC Air Drying SB Road Marking Paint is a premium-quality, fast-drying solvent-borne acrylic traffic paint designed for durable road and pavement markings. This lead-free and VOC-compliant coating provides excellent adhesion, high visibility, and long-lasting performance on bituminous, Portland cement, and concrete road surfaces.

The paint conforms to TT-P-1952D Type I (normal conditions) and Type II (adverse conditions) specifications, making it suitable for various weather conditions and traffic environments. Its advanced acrylic resin formulation ensures superior durability, strong color retention, and excellent hiding power.

ALTIC Road Marking Paint is widely used for highways, parking lots, industrial roads, airports, warehouses, and urban road networks. With its rapid drying capability, it allows traffic readiness within hours, minimizing road closures and improving operational efficiency during road marking projects.

---

Key Features

Fast Drying Formula

The paint dries within 15–20 minutes, allowing quick traffic readiness and reducing road downtime during marking operations.

High Visibility & Reflectance

Contains high-quality pigments and titanium dioxide that provide excellent brightness, visibility, and contrast for safer road markings.

Durable Acrylic Resin Technology

Formulated with high-performance acrylic resin that ensures strong adhesion and long-lasting road marking performance.

Lead-Free & VOC Compliant

Environmentally responsible formulation that meets modern environmental and safety standards.

Multi-Surface Compatibility

Suitable for application on:

• Bituminous asphalt roads
• Concrete pavements
• Cement roads
• Seal coat surfaces

Wide Color Range

Available in multiple high-visibility colors including white, yellow, green, black, blue, and red.

Excellent Coverage

Provides consistent and uniform coverage with recommended wet film thickness of 375 microns.

---

Technical Specifications

---

Surface Preparation

Proper surface preparation is essential for optimal adhesion and performance.

Before application:

• Ensure the surface is clean and completely dry.
• Remove dirt, dust, sand, grease, oil, salt, and debris.
• Remove any loose or peeling paint before applying new paint.
• For newly paved roads, allow sufficient curing time before marking.

If painting immediately after paving:

• Apply two thin coats of 175 microns each.
• Maintain 24 hours interval between coats.

Always apply a test stripe in an inconspicuous area to confirm surface compatibility before full application.

Note:
Do not apply on concrete sealers containing silicone.

---

Application Procedure

ALTIC Air Drying SB Road Marking Paint can be applied using standard road marking equipment.

Step 1 – Equipment Preparation

Use either:

• Conventional spray equipment
• Airless road marking sprayers

Follow equipment manufacturer recommendations for best results.

Step 2 – Temperature Conditions

For optimal application:

• Surface temperature should be above 30°C
• Relative humidity should be below 85%

Step 3 – Paint Heating (Optional)

For improved spray performance:

• Heat paint to 40°C
• Do not exceed 60°C

Heating helps spraying efficiency but does not reduce drying time.

Step 4 – Apply Coating

Apply paint at recommended 375 microns wet thickness for best performance and durability.

---

Coverage Details

Coverage depends on line width and application thickness.

Typical coverage:

• 300 feet per gallon
• Based on 375 microns wet thickness
• 4-inch line width

Actual coverage may vary depending on:

• Surface texture
• Porosity of pavement
• Application equipment
• Environmental conditions

---

Storage & Shelf Life

Shelf Life

Minimum 12 months when stored in unopened containers.

Storage Conditions

Store product in:

• Cool and dry area
• Temperature around 25°C
• Keep container tightly sealed when not in use

Important Storage Instructions

• Protect from extreme heat
• Do not allow product to freeze
• Keep containers away from direct sunlight

---

Safety Information

To ensure safe handling and application:

• Use protective gloves and safety goggles
• Avoid inhaling vapors during spraying
• Apply only in well-ventilated areas
• Avoid contact with skin and eyes
• Keep product away from open flames and sparks

Important Warning:

Never mix ALTIC Air Drying SB Road Marking Paint with other traffic paints, as this may cause chemical incompatibility and product failure.

Clean wet paint using ALTIC RM Thinner.
Once dried, the paint becomes difficult to remove.